Electronic Parts Direct

EPD-25-512

edp-admin — Sat, 19 Jan 2013 17:05:28 +0000

In Wall 5.25″ Full Range 2-Way Speakers, 60W RMS, 8 Ohms. These speakers are ideal for home theater or distributed whole house audio.

• Woofer: 5.25″ Poly Cone
• Tweeter: 1″ Soft Dome
• Power: 50W RMS
• Response: 40 – 22KHz
• Crossover Frequency: 2500Hz
• Spring Loaded Speaker Terminals, Red+Black, Excepts up to 14 Gauge Speaker Wire
• Color: White
• Paintable White Grill to Match Any Decor
• 6 x Locking fingers secure the speaker to drywall
• Color: White

EPD-25-612

edp-admin — Sat, 19 Jan 2013 05:46:28 +0000

In Wall 6″ Full Range 2-Way Speakers, 60W RMS, 8 Ohms. These speakers are ideal for home theater or distributed whole house audio.

• Woofer: 6″ Poly Cone
• Tweeter: 1″ Soft Dome
• Power: 60W RMS
• Response: 40 – 22KHz
• Crossover Frequency: 2500Hz
• Spring Loaded Speaker Terminals, Red+Black, Excepts up to 14 Gauge Speaker Wire
• Color: White
• Paintable White Grill to Match Any Decor
• 6 x Locking fingers secure the speaker to drywall
• Color: White

EPD-25-812

edp-admin — Sat, 19 Jan 2013 05:08:14 +0000

In Wall 8″ Full Range 2-Way Speakers, 80W RMS, 8 Ohms. These speakers are ideal for home theater or distributed whole house audio.

• Woofer: 8″ Poly Cone
• Tweeter: 1″ Soft Dome
• Power: 80W RMS
• Response: 40 – 22KHz
• Crossover Frequency: 2500Hz
• Spring Loaded Speaker Terminals, Red+Black, Excepts up to 14 Gauge Speaker Wire
• Color: White
• Paintable White Grill to Match Any Decor
• 6 x Locking fingers secure the speaker to drywall
• Color: White

EPD-IR5521M

edp-admin — Thu, 24 May 2012 02:05:39 +0000

Single IR Blaster with 7ft cord

This is a single IR blaster from Infrared Resources. The picture shows a top and side view. It is not a dual blaster, it works with TiVO, Slingbox, Hauppauge tuner card, G-link,NextGen , connecting blocks,and other Ir extenders. Replaces Panasonic IR Blaster (SH-WR10), 2010 and 2011 model SC-HTB10, SC-HTB500, SC-HTB520 Soundbars. INSTRUCTIONS FOR USE: Place blaster so the 45 degree angled blaster diode is facing toward the TV’s IR sensor located on the front of the TV. Point the remote at the soundbar and use the remote. The soundbar IR picks up IR signals and sends it to the device which repeats and emits the IR signal out of the bulb to the TV IR (or whatever device IR you have it pointed at). The blaster has excellent range and distance. You can place the blaster on the sound bar. *SLingBox and Hauppauge tuner card requires our 2.5mm to 3.5mm mono adapter. NOTE: all Ir Resources emitters (Emitter Spitter tm) and Ir extension cable are compatible with most IR devices and name brand Ir blocks, media centers, etc. The device must have a 3.5mm mono jack to plug the Ir emitter into. DO NOT PURCHASE FOR CABLE BOXES THINKING YOU CAN OPERATE CABLE BOX HIDDEN AND OR POINTING REMOTE AT THE EYE OF THE BLASTER. THESE TRANSMIT SIGNALS. YOU NEED OUR 9FT IR RECEIVER CABLE, PART NO. EPD-IR0104 Link:(http://www.electronicpartsdirect.com/2012/05/epd-ir0104/) FOR HD DVR STB’s. PLEASE CHECK THE PRODUCT DESCRIPTION FOR THE LIST OF SET TOP BOXES THAT THE IR RECEIVER IS COMPATIBLE WITH.

Features
Excellent solution for everyone from the Home Enthusiast to the Professional Installer.
3.5mm Plug.7 ft lead. 45 degree Diode enhances product performance.
Works with 2010-11 model SC-HTB10, SC-HTB500,SC-HTB520 soundbars
Works with Tivo,G-Link Cable, *Slingbox*,*Hauppauge tuner card*, Ir repeaters etc
Slingbox and Hauppauge tuner card requires our 2.5mm mono adapter, Part No. EPD-IR8334S

EPD-IR0104

edp-admin — Thu, 24 May 2012 00:41:13 +0000

IR Receiver Extender Cable for HD DVR, CCTV, IPTV, CATV STB’s
This IR Receiver by Infrared Resources Works with Verizon HD DVR QIP 7216 1,7232-P2,7100 Cisco CHS435 ,CH335 HD DVR, LG LST-4600A HD converter box , MASSCOOL HS-MA105DC550D HDMI Switcher, Thomson DCI1011com, Peerless HDflow HDS100 and IoGear GWAV8141K Wireless Multimedia Kits and HD CAT5 extender kits with IR support,PACE DC551P, PACE/Cisco,Pace DC700X Apache. RNG110,PACE/CiscoRNG150,RNG100, ( NOTE:RNG units need to be completely enclosed as the front ir sensor does not disable when ours is plugged in like other boxes do. The box will not operate properly unless the IR signal is received from only our receiver cable) PACE TDC787X HD,PACE TDC 575D DVR, DC50X Motorola,DCX3300,DCX3400-M,DCX3416,DCX3425,DCX3432,DCX3501, MVIX 760 HD Media Player.DTA50 If your box is not listed on working or non working list let us know the make an model to see if compatible. WILL NOT WORK with any EXPLORER boxes, Motorola DCT or DCH Series, or SA Explorer boxes .DO NOT PURCHASE FOR any Scientific Atlanta boxes unless it is listed in the working list above Verizon Motorola QIP 6416-2 ,6000 series, Moto DCX3200-M, DCX3400,RNG200…. DO NOT PURCHASE FOR STEREO RECEIVERS (Harman-Kardon etc) or Ir Repeater systems such as Logitech etc. WILL NOT WORK WITH AV RECEIVERS (Panasonic, Harmon Kardon etc)!!!!! OR IR REPEATER SYSTEMS,or directly plugged into TV’s Now you can place your Set Top box behind cabinet doors or other locations up to 9ft away by plugging the 3.5mm plug into the Ir port on the back of the box. We also have a 25ft Stereo extension cable for our ir receiver.(Professional Grade construction. Beware of those selling for a few bucks!. There is a difference!!!!)When the unit is plugged into the Ir port the Ir signal over rides to only the receiver eye at the end of the cable. Remote control must be pointed toward the round ir receiver in order to change channels etc., the unit will perform all functions of the remote control. Plasma proof! design.

Features
9ft lead. 3.5mm nickel plated stereo plug. Tip VCC 5V Center ‘Data’ sleeve ‘ground’
Dark color lens makes this unit plasma proof and enhances product performance.
35-40ft range from remote control to Ir receiver.
3.3~5v 38kHz operating range. Compatible box list in product description.
Extend the receiver 25ft more with our 25ft Ir Receiver Extension Cable, Part No. EPD-IR9347PJG

EPD-18-300

edp-admin — Thu, 01 Mar 2012 23:25:13 +0000

Solid-Stranded Wire Stripper

Adjusts automatically for 18-10 gauge wire.

• No need to determine wire size, stripper adjusts
automatically.
• Grips wire and strips with one squeeze of the
handles.
• Strips and cuts #18-10 solid or stranded.
• Wire is never nicked or cut because blade never
touches it.
• For production stripping applications.
• Adjustable strip length gauge included.

EPD-H342004L

edp-admin — Thu, 01 Mar 2012 22:39:09 +0000

Fuseholder 3AG Panel Mount Right Angle

Specifications:
Fuse Size: 3AG, 1-1/4″ L x 1/4″ Dia (31.8mm x 6.35mm)
Mounting Type: Panel Mount
Termination Style: Solder Lug
Voltage: 250Vac
Current Rating: 20A
Material: Brass, Tin Plated

40-285

edp-admin — Sun, 26 Feb 2012 06:34:56 +0000

Component Video to Composite or S-Video Converter

Use the 40-285 with Satellite receivers, TIVO HD devices, Set top boxes such as VUDU, Apple TV’s and video gaming consoles, Xbox 360, Wii, Sony PS2, PS3. The Component video (YPbPr) to Composite video and S-video converter is a Plug-N-Play video converter that automatically provides instant decoding of the high-quality Component Video signals to Composite video and S-Video signals to facilitate the viewing of HDTV video content on televisions, projectors, RF modulators or other devices that do not have component video inputs. Power supply and all cable accessories included.

PDF Link:40-285 Brochure EPD

42-110

edp-admin — Sun, 26 Feb 2012 06:32:04 +0000

3 Ft. Male to Female iPad, iPhone, iPod 30 pin extension cable

PDF Link: 42-110 iPad Extension Cable Brochure EPD

40-VGA-1

edp-admin — Sat, 21 Jan 2012 00:11:13 +0000

VGA To HDMI Converter, USB Powered
The 40-VGA-1 integrates VGA with audio (3.5mm stereo) and converts it to a HDMI video format. While processing VGA signals, the converter does not modify or transcode the video format, VGA in 1024 x 768 will output HDMI 1024 x 768. The converter will display what is usually displayed on your VGA monitors to your HDTV with at least one HDMI port, all while retaining HD quality.

Specifications:
HDMI compliant
HDCP compliant
Supported Resolutions: 800 x 600, 1024 x 768, 1280 x 720, 1280 x 768, 1280 x 800, 1280 x 960, 1280 x 1024, 1360 x 768, 1600 x 900, 1600 x 1200, 1680 x 1050, 1920 x 1080
Input: VGA Male Plug (Video), 3.5mm Stereo Male Plug (Audio)
Output: HDMI (Audio and Video)
Power: USB Male
Length: 1ft.